The cut pieces of Formica ready to go on the drawer bottoms...
Lightly sanding the bottoms...
Rolling on the rubber cement...
Both bottom pieces have Formica attached - Jim has paint cans on top so that they dry flat...
Time to see if we can get the man door attached on the pole barn lean to. Jim is putting the hinges in place...
I helped steady the door while Jim marked the location on the frame and then drilled pilot holes...
It fit really well, so putting all the screws in...
Jim is going to get a latch for the top of the door but put a wedge in temporarily so that wind doesn't catch it and rip it off...
Jim switched the head on the trimmer from the blade back to the twine and then did a little trimming outside.
Doing a little work on the drawer hinges...
 |
| High 73.4/Low 36.8 |
No comments:
Post a Comment