Saturday, February 8, 2020

2.8.2020

The big news around here is the winter storm!  As I write this, we still don't have utility but are beyond grateful that we have generator power!  As a first world complaint, we didn't have internet/cable/phone for about a day and a half - a minor inconvenience and a reason why the blog didn't appear!

So first...yesterday morning when we still had power, Jim was busy in the woodshed working on the next kitchen cabinet.  Here he's glueing the maple front onto the bottom of the cabinet...


On the sides, he got the toe board areas cut out and blocking made...


Blocking made and attached to the back of the cabinet...


Sanding the maple fronts...


We lost power after lunch.   As it is prone to do, power went off and came back on a couple times before going out completely.  One of those times, it went on/off so fast that it tripped the arc fault breakers that we were required to have in certain areas of the house.  So when the generator came on, part of the house was still without power until Jim realized that those breakers had tripped and reset them.  It was another good test of a safety system!

As far as the weather, after getting about 3" of snow on Thursday, it changed to rain and ice.  You can see our poor little tree was suffering.  We got a lot of ice - the tree limbs were encased in at least 1/2" of ice!


The ice/rain on top of the snow caused the snow to curl around the edges of the roof - when this snow fell, instead of missing the overhang of the garage doors like normal, it hit the overhang and made a crazy loud noise!


Another angle...


Then the rain/ice switched to snow and we got another 3-4" of wet, heavy snow.  Now look at the poor tree!  You wonder how it can ever recover from this!


About 4:00 on Friday, the snow had stopped so Jim headed out to plow.  As he headed down the driveway, this big tree limb just missed our trash cans and package box...


Jim noticed that cars were turning around in our driveway - when he got to the end, he could see why.  This big tree fell from the neighbor's property onto the road just down from our driveway.  The city had already put road closed signs at the end of our street.  This guy was trying to get through - turned around in our driveway, backed up to let his wife out so she could get to her brother's house.


Jim, being the good guy that he is, spent a good chunk of the time trying to clear this tree from the road so the crews wouldn't have to and people who lived down the road could get by.  Although as he was doing it, another tree fell.


The skies in the early evening were beautiful though - the sun came out and made the entire area glow.  However, the winds kicked up too, causing even more issues for the frozen trees.


The entire area was hit extremely hard - there were over 90,000 customers without power.  The scary part is the cold - with crews not even assigned to most areas and no estimated restoration time available, the temperatures are supposed to go below zero tonight.  We can only pray that people find a safe, warm place to go.

It's now Saturday night and we just got home from church.  Another day without utility power although the crews are working so hard in horribly frigid conditions.  We stopped in at our local Stewart's to get milk and there were a few National Grid workers there - everyone in the store was stopping to say thanks for all their hard work!  Many places have power back on but we still are running on generator power.  Plus our internet has been down all day again - it's up now so I'm trying to quickly get the blog posted!

We even got an alert on our phones that National Grid had brought dry ice to the fire station in Corinth for people to use to keep their food cold.  How wonderful!

Since we are running on generator power and we weren't sure how long that would continue, we are being very cautious with any unnecessary power usage.  Jim still was able to get some work done on the cabinet pieces though.  He got all the blocking and millwork done and then put the first coat of polyurethane on...


Other pieces drying...


Jim even had a Craigslist sale today - some guy came and bought the ballasts that Jim had taken out of the shop fixtures and replaced with other ones.

Pictures don't capture how beautiful everything looked coated with thick ice and snow - even though it's hard to see the trees so bent over.


Our church is in downtown Saratoga Springs and it's just a few miles south of us but always a noticeable difference in weather because of the difference in elevation from the mountains.  But this tree in the courtyard was just beautiful encased in ice.


We are beyond grateful that we are safe and warm through this bad winter storm.  Thanks for everyone's thoughts!

High 22/Low -4

Thursday, February 6, 2020

2.6.2020

We woke up to about 3" of fresh snow - sure made for a pretty view out the window!

Jim worked in the shop on making pieces for the next cabinet.  Glueing is all done...


He cut and sized the back panel and started doing the millwork for attaching the bottom panel...


He made the spar for the bottom panel and did the millwork for attaching the back...


Glueing it to the bottom...


Jim had to go out and plow this afternoon - we are supposed to get another 3-6" of snow tomorrow so he wanted to keep up with it.  He said it was a very wet snow and had a layer of ice on top.  Glad we are tucked inside and don't have to go anywhere!
High 30/Low 28 - 3" snow/ice

Wednesday, February 5, 2020

2.5.2020

This morning, Jim got the rest of the new wood face planed and then stacked on his racks in anticipation of lots more amazing projects!


The first project being the next kitchen cabinet!  Jim got the millwork started on the side pieces to attach the maple fronts...


 Millwork on the maple pieces done...


One side being glued...


And the other!


Next, Jim had to tackle finishing the hinge mounts - these go behind the face frame so are very difficult to reach, especially above the stove.  Jim had one screw in just for fitting but he had to finish all the others...


Being a contortionist again to reach this area...


Putting the first door on...


Both doors on - looks so beautiful!  Really makes the kitchen look more finished!


High 32/Low 21

Tuesday, February 4, 2020

2.4.2020

Jim finished making the mounting board for my vertical cabinet dividers, including predrilling the holes and attaching the clips...


He kind of had to be a contortionist to work at the back of this cabinet to get it attached!


Success!


We decided on placement of the two dividers...


Then Jim had to drill into the bottom of the cabinet and attach the clips...


All done!


Didn't take me long to start filling it up - this is going to be so helpful!


It was a nice day, so Jim headed to the Ghent lumberyard to pick up some more wood while the roads were dry.  


After hand picking through lumber to get what he wanted, he got a good load!


Bringing it into the carriage house...


All inside...


Jim wanted to get the first pass of planing done before he stacked it...

 
High 38/Low 23

Monday, February 3, 2020

2.3.2020

Jim has his window molding all shaped now...


He started cutting the plywood into the sizes for the sides of the next cabinet...


 Making sure everything is perfect...


Starting the basic millwork...


Our vertical shelf dividers came in yesterday so we talked about placement inside the cabinet.  Jim has to make a mounting board for the back of the cabinet for attaching.  Pictures to come tomorrow.

Also, one of the bearings in Jim's palm sanders broke and Jim had to order a new one.  That came in yesterday as well so Jim got that rebuilt.

We bought a simple medicine cabinet to put in the downstairs bathroom and Jim hung that up today.  We'll use it to store some basic first aid items, plus it's nice to have a mirror in there and a little extra storage.


High 38/Low 24

Sunday, February 2, 2020

2.2.2020

This is quite the day!  Of course, it's Groundhog Day which is near and dear to my heart, since my parents are from the Punxsutawney area and my dad was born on Groundhog Day!  But it's also the only palindrome day in this century - 02.02.20.20.  And it's Super Bowl Sunday.  Whew...that's a lot of celebrations going on!

Punxsutawney Phil did not see his shadow, so that's a prediction of an early spring.  Although this sure has been a mild winter so no surprise there!  This chart shows that Phil is not always correct - but we're sticking to his prediction.


Jim was able to get the other side of the doors painted today...


Drying - can't wait until they are up in my kitchen!  Jim had to spend another 45 minutes or so cleaning out the gun after spraying.


Next, he headed down into the metal shop to work on the snowblower.  He wire brushed the fan housing and then hand painted a coat of Rustoleum on that area for protection.


He had put one coat on the side of the fan that sees the most wear - today he painted the rest of it.


Jim brought the cabinet-grade plywood up into the shop today and got it put away and ready for the next kitchen cabinet job!


We wanted Kyle to get started on his trip back to NYC yesterday so we are heading into church now.

High 33/Low 26

Saturday, February 1, 2020

2.1.2020



This morning, Jim wire brushed the rest off the fan of the snow blower and then put a coat of Rustoleum on it for protection...


Painting the doors gray!




Kyle drove up this morning to go to Chowderfest with us!  Usually, it's a frigid cold day which is why the hot chowder always tastes so good!  But today was in the mid 30's, so it was very enjoyable to walk around and taste way too many samples!   A look down a side street - lots of people enjoying the festivities!


 Us enjoying some dessert chowder (ice cream!) from Ben & Jerry's!


Unfortunately, Kyle left out after we had our fill to head back down to NYC - he had a lot of work to do this weekend.  But we enjoyed our time with him!

High 34/Low 23